Deutsch English
Your cart is empty
» Your shopping cart ist empty.

Dr.Pulley HiT High performance clutch HiT282001

Dr.Pulley HiT High performance clutch HiT282001
Zoom image

289,00 EUR

19 % VAT incl. our Shipping costs!

Shipping time: 3-5 days if available

Product no.: HiT282001

Dr.Pulley high performance clutch HiT 282001

In the Dr.Pulley HiT clutch two sets of springs are working: The clutch spring, inside, controls through the centrifugal power the movement of the clutch pads towards the clutch bell (for example at 3000 rpm). The second set of "torque" springs, externally mounted, controls then the pressure by using a "push pin" on the clutch linings (in the example already at 3400 rpm) against the bell, thus preventing most of the slipping phase of the clutch. Because of less friction, much less heat is generated. heat is lost power. The scooter accelerates much faster because the full power transmission to the rear tyre
already exists at 3,400 rpm, instead of 4000rpm with a normal clutch.

The HiT clutch is very effective while driving with frequent speed changings: To accelerate out of curves or at mountain trips. Or for a powerful overtaking. The graphs show a marked increase in speed and performance especially in low and medium speed ranges.

With the two fully enclosed
sets of spring , the clutch can be customized to all personal needs. For example, if you want to get more power at start, choose a stronger clutch spring to increase the starting rpm. If you want to shorten the slipping phase of the clutch, you should select a weaker pillow (torque) spring. Extreme: To get an extreme start (wheely), choose a strong clutch spring, and a very weak (or no) pillow (torque) spring.

For those who do not want to experiment long, an average spring combination
is already installed with delivery.

Importatant: Together with the HiT high performance clutch the use of not too light vario weights is strongly recommended. The best result you get with Dr.Pulley slider rolls with the same

HiT high-performance clutch, depending on the model with 3 or 4 clutch pads
Minimum of 3 complete sets of clutch springs and torque (pillow) springs
"Washer" rings to increase the pressure of the counter-pressure spring
Spare pins and springs, sticker, instructions, link to the HiT manual

Fits the following Scooters / Scooter / ATV (see also Dr.Pulley Forum)

Honda Silverwing 400 600

Recommended products:

Dr.Pulley sliding pieces SP2820-W

Dr.Pulley sliding pieces SP2820-W

Dr.Pulley sliding pieces SP2820-W

17,90 EUR (19 % VAT incl. our Shipping costs!)

Customers who bought this product also bought the following products:

Dr.Pulley Sliding roll SR1814/6-12

Dr.Pulley Sliding roll SR1814/6-12

Dr.Pulley sliding role in the 18x14mm format, weight 12 grams  6 pieces / package.

27,90 EUR (19 % VAT incl. our Shipping costs!)

Insured shipping with tracking number.

3,50 EUR (19 % VAT incl. our Shipping costs!)


Dr.Pulley clutchbell B282201-160K

179,00 EUR (19 % VAT incl. our Shipping costs!)

This Product was added to our catalogue on Thursday 24 February, 2011.

[<<First] | [<Back] | [Next>] | [last>>] | Product 29 of 41 in this category

Welcome back!

e-mail address:
Forgot your password?

Newsletter subscription

e-mail address:

Customer group

Customer group: Guest

Manufacturer information


Dr.Pulley Forum

Dr.Pulley Scooter Tuning Forum

Dr.Pulley Blog

Dr.Pulley Scooter Tuning Blog
Parse Time: 0.141s